showme video of ruber coblyn adapter for copper pipe

#Showme video of ruber coblyn adapter for copper pipe series#

Instead of securing pipes together from the outside like clamp-on couplings, these flexible adapters fit into cast iron pipe to create a tight compression seal. These adapters connect PVC waste pipe to cast iron pipe without adding bulk. Wrot copper solder joint pressure fittings are produced to 1 of the following specifications: material and workmanship ASME/ANSI B16.22 dimensional, material, and workmanship of MSS SP-104 or MSS SP-109 certified. Other testing shall be conducted in strict conformance with the requirements of the connector manufacturer. Cast Iron-to-PVC Pipe Adaptersfor Drain, Waste, and Vent. Fitting adapters adapt to standard female pipe threads from a fitting socket. Vacuum testing shall be conducted in strict conformance with ASTM C 1244 prior to backfill. SAE Flare x Press Copper Adapter with Nut and O-ring (Bag of 2) Part. The finished connection shall provide sealing to 13 psi (minimum) and shall accommodate deflection of the pipe to 7 degrees (minimum) without loss of seal. Any dead end pipe stubs installed in connectors shall be restrained from movement per ASTM C 923. Selection of the proper size connector and adapter for the structure and pipe requirement, and installation thereof, shall be in strict conformance with the recommendations of the connector manufacturer. The clamp shall be installed by torquing the adjusting screw using a torque-setting wrench available from the connector manufacturer.

#Showme video of ruber coblyn adapter for copper pipe series#

The external take-up clamp shall be constructed of Series 300 non-magnetic stainless steel and shall utilize no welds in its construction.

The rubber elements shall be constructed solely of synthetic or natural rubber, and shall meet or exceed the physical property requirements of ASTM C 923. The connector/adapter shall consist of a rubber gasket, a rubber adapter, an alignment plug (on multi-pipe models), and an external take-up clamp. The connector/adapter shall be the sole element relied on to assure a flexible, watertight seal of the pipe to the precast structure. The connector shall be CAST-A-SEAL® 402 and CASTA-DAPTER as manufactured by Press-Seal Corporation, Fort Wayne, Indiana, or approved equal. A flexible pipe-to-structure connector shall be employed in the connection of the sanitary sewer pipe to precast tanks or structures.